Millipore Milli-Q Direct 8 System User Manual page 75

Replacing the Progard Cartridge and Vent Filter,
Follow the steps below to remove the used Progard Cartridge.
Removing
Step Action
1 Place the System to
STAND BY Mode.
2 Push the POD Plunge
once to depre ssurise the
System.
After water stops being
dispensed, push down the
POD Plunge r again.
3 Open the System right door.
Remove the used Progard
Cartridge.
4 In a few mom ents, the Sys
ind icates that the Progard
Cartridge is removed.
in
r down
t em
- 75 -
Continued
Diagram
Continued on next page