Installing A Pod Pak - Millipore Milli-Q Direct 8 System User Manual

Installing a POD Pak

The installation of a POD Pak involves 2 steps. These are:
Overview
 placing and flushing the POD Pak onto the POD Unit, and
 registering the installation of a specific POD Pak.
Follow the instructions delivered with the POD Pak.
Placing and
flushing
Follow the steps below to register the installation of the POD Pak.
Registering
Step Action
1 Start in STANDBY Mode.
2 Select Menu.
Press .
3 Select Maintenance.
Press .
4 Scroll down to Install POD Pak.
Select it.
- 34 -
Diagram
Continued on next page