Millipore Milli-Q Direct 8 System User Manual page 5

Safety Information
Your Milli-Q Direct System should be installed and operated according to the
Statement
instructions in this manual.
In particular, the hydraulic and electrical specifications should be followed
and met.
It is important to use this equipment as specified in this manual; using this
equipment in a different manner may impair the safety precautions of the
Milli-Q Direct System.
Symbols
Do not remove the covers of the Milli-Q Direct System at any time.
!
Electrical and mechanical components inside the Milli-Q Direct System could
pose a hazard.
A qualified Millipore Service Representative should perform any work that
needs to be done while the Milli-Q Direct System is opened.
Symbol
This HAZARD symbol is used to refer to instructions in
!
this manual that need to be done safely and carefully.
This ATTENTION symbol is used to refer to
instructions in this manual that need to be done
carefully.
This UV RADIATION sticker is used to refer to a
position on the Milli-Q System Cabinet or inside of it
where exposure to UV light is possible.
This DANGER sticker is used to refer to a position on
the Milli-Q System Cabinet or inside of it that could be
hazardous.
This ELECTRICAL GROUND sticker is used to refer
to a position on the Milli-Q System Cabinet or inside
where an electrical ground connection is made.
This ELECTRICAL DANGER sticker is used to refer
to a position on the Milli-Q System Cabinet or inside
where an electrical danger could exist.
Meaning
- 5 -