Summary Of Alarm Messages - Millipore Milli-Q Direct 8 System User Manual

Summary of Alarm messages

Alarm stop
messages
FLOW AUTO STOP
INCORRECT PROGARD
CARTRIDGE
INCORRECT Q-PAK PACK
LOW FEED WATER PRESSURE
PERMEATE C > SP
POD LOCKED
LCD message
- 100 -
What it means
 This alarm stops the Milli-Q
portion of the system.
 A safety feature of the Milli-Q
Direct system has automatically
stopped dispensing
minutes to avoid risks of overflow.
 P
ush the POD Unit Plung
way down and release.
 This resets the dispenser timer and
makes the POD Unit available for
dispensing.
 This alarm stops the RO portion of
the system.
 The System does not recognize the
type of Progard Cartridge being
installed.
 Contact Mi
llipore.
 This alarm stops the Milli-Q
portion of the system.

The System does not recognize the
type of Q-Pak Pack being
installed.
 Contact Millipore.
 This alarm stops the RO portion of
the system.
 Check Feed water pressure and
rectify.
 Go to STANDBY Mode and go to
READY Mode to release any
trapped air in the Water System.
 Contact Millipore if the problem
persists.
 This alarm stops the RO portion of
the system .
 Th
e Permeate conductivity is
ab ove the set point.
 Co
ntact Millipore.
 This alarm
stops the Milli-Q
portion of the sys tem.
 The POD Unit was left in the open
position.
 Push the Plunger all the way down
and release.
Continued on next page
water after 40
er all the