Summary Of Alert Messages - Millipore Milli-Q Direct 8 System User Manual

Summary of Alert messages

Alert messages
CALIBRATION VISIT
OVERDUE
CHECK ASM UV LAMP
CHECK UV 185 NM LAMP
CHECK UV 254 NM LAMP
EXAMINE INLET STRAINER
LOW RO PUMP PRESSURE
NEXT CALIBRATION VISIT
IN XX DAYS
NEXT QUALIFICATION
VISIT IN XX DAYS
NEXT SERVICE VISIT IN XX
DAYS
NO RESPONSE FROM DHCP
SERVER
PERFORM RO CL2
CLEANING
LCD message
XX DAYS
- 109 -
What it means
 The System has determined that a
Calib ration V isit is overdue.
 Contact Millipore.
 The ASM UV Lamp is not turning on.
 Contact Millipore.
 The UV 185 nm Lamp is not turning
on.
 Contact Millipore.
 The UV 254 nm Lamp is not turning
on.
 Contact Millipore.
 The System has determined that it is
time to clean the Inlet Strainer.
 Clean
the Inl et Strainer and r
m ssage. e
 The Water System has determined that
the RO Pump Pressure is below
specification.
 Contact Millipore.
 The System is prompting you that a
Calibration Visit should be scheduled.
 Contact Millipore.
 The System is prompting you that a
Qualification Visit should be
scheduled.
 Contact Millipore.
 The System is prompting you that a
Service Visit should be scheduled.
 Contact Millipore.
 Contact your network administrator.
 Resta
rt the S ystem.
 The Water System has determined that
it is time to perform a RO Cl2
cleaning.
 Start a RO Cl2 cleaning. The timer is
reset automatically.
eset the
Continue on next page d