Market Destination Check - Epson Stylus Photo 870 Service Manual

EPSON Stylus Photo 870/1270
2. Select the model name and click OK. You see the screen below.
Figure 5-7. Market Destination
3. Select World and click OK. You see the boot screen.
Figure 5-8. Boot Screen
4. To start the program and enter the main menu, select Boot this
program and click OK.
From the main menu, you can select any of the adjustments
described in this chapter.
To exit the program, press the ESC key repeatedly and then click OK
when you see the message Service Program is completed.

5.3.3 Market Destination Check

The printer may not communicate properly with the computer to
which it's connected if the destination setting is incorrect. This
function lets you check that the correct destination is stored in the
printer's EEPROM.
1. Start the adjustment program as described in
Adjustment Program" on page 73.
2. From the main menu, click the Adjustment tab and select Market
destination check. Click OK. You see the screen below.
Figure 5-9. Market Destination Check Window
3. Click OK. The destination appears in the lower-right section of the
screen, as shown above.
Chapter 5 Adjustments
"Starting the
Check result
74