Epson Stylus Photo 870 Service Manual page 96

EPSON Stylus Photo 870/1270
Table 6-3. Lubrication Points (continued)
No. Procedure
17 Lubrication point:
Inside of the right hole of "FRAME, ASF; B"
Lubricant type: G-26
Lubrication amount: 1 mm
Evenly apply grease to the inside of the hole using a
brush.
18 Lubrication point:
Left and right latches on the "HOPPER
ASSEMBLY"
Lubricant type: G-26
Lubrication amount:
Evenly apply a 2 mm-long bead to the edges of the
hopper using a brush.
19 Lubrication point:
"GUIDE PLATE, CR" (the carriage guide plate is
located on top of the printer mechanism)
Lubricant type: G-26
Lubrication amount: approximately 270 mm
BUSHING, 12, RIGHT
G-26
Figure 6-1. Lubrication Point No. 1
Remarks
See Figure 6-15
See Figure 6-16
BUSHING, 12, LEFT
See Figure 6-17
HOLDER, PULLEY, DRIVEN
Figure 6-2. Lubrication Point No. 2
Carriage Guide Shaft
Figure 6-3. Lubrication Point No. 3
Chapter 6 Maintenance
G-26
G-26
91