EPSON Stylus Photo 720 / EPSON Stylus Photo EX3
3.
When you click "OK" in the screen in Figure 5-6, the screen below appears.
If you want to check the model name, select "Check this model name" and click "OK".
The new screen appears, saying "Resetting a hardware now" and then the model name
appears in the screen after.
Figure 5-7. Start Program and Check the Model Name
4.
To enter the main menu, select "Boot this program" and click "OK".
Adjustment
5.3.4 Market Destination Check
You can read out the market destination determined in the initial setting screen from
EEPROM by this function.
1.
From the adjustment program main menu (see the left frame in the figure below),
select "Market destination check". "Market destination check" screen appears in the
right frame, and click "OK". The left bottom frame of the screen shows you the market
destination setting. (See the figure below.)
Adjustment by Adjustment Program
Figure 5-8. Market Destination Check
Revision A
100