EPSON Stylus Photo 870/1270
If you need to check for the model name you have input, select Check this
model name and click
. The printer is reset and displays the model
OK
name.
5. To exit the program, click Continue repeatedly or press the ESC key to
return to the initial window, and then click Quit. You see the small quit
window, where click
to exit the program.
OK
ADJUSTMENT
5.2.4 Market destination check
Using this function, you can check that the correct destination is stored in
EEPROM on the main board by reading the model name. The destination
information includes the model name as well as the CG setting and TOP
margin. Since the model name is used as the device ID in the bidirectional
communication, if a wrong destination is selected, the device ID for the
printer is not incorrectly recognized.
1. Start the service program and get to the main menu.
2. Select Market destination check from the adjustment menu and click
OK
. You see the Market destination check window.
Figure 5-10. Market Destination Check Window Sample
3. Click
in the window. The destination appears in the small window
OK
as in the example in Figure 5-10.
NOTE: To continue to the next adjustment, select any other adjustment item
from the menu.
Adjustment
Revision B
125