Table of Contents
Advertisement
1. Specifications
(1) Machinical specifications
No.
Model name
Item
1
Sewing machine
2
Sewing speed
3
Stitch length
4
Types of welt
Pocket lip length
5
(Welt length)
Welting width
6
(Needle gauge)
7
Needles
8
Thread
9
Hook
10
Thread take-up lever
11
Needle bar stroke
12
Cloth feed mechanism
13
Control
14
Safety mechanism
15
Lubricating oil
16
Grease
17
Operating air pressure
18
Air consumption
Dimensions of
19
machine
20
Weight
Working temperature/
21
humidity
(2) Electric specifications
Once setting has been made, data can be retained (for 100 hours) by the built-in battery cell even after Power OFF
unless this setting is canceled, thanks to the function of the built-in microcomputer.
No.
Item
1
No. of patterns for stored single sewing
2
No. of patterns for stored alternate sewing
3
No. of stored cycles
4
Input voltage/frequency
5
Power consumption
LH-895 model of 2-needle, lockstitch machine with a center knife
Condensation stitch : 0.5 to 1.5mm (standard : 1.0mm)
Back tuck stitch : 0.5 to 3.0mm (standard : 2.0mm)
Possible to set in increments of 0.1mm ithin the range of 18mm (min.) to 220mm (max.) (Needle gage: 8 to 20mm)
Note that the pocket length is 35mm at the minimum when using the corner knife
(50mm in case of 14mm gauge or more and 21mm by adding a solenoid valve)
For the longer type (optonal), the maxmimum sewing length will be 250mm (Needle gage: 22 to 32mm)
(Possible up to 300mm wihiout entering corner knife)
ORGAN DP X 17 #14 to #18 (standard #16), SCHMETZ 190R #100 to #110 (standard #100)
Machine operation is automatically stopped if the cloth feed mechanism error detector, the needle
thread breakage detector or anu of the various safety devices is actuated.
JUKI New Defrix Oil No. 1 (equivalent to ISO VG7)
Width: 1,095 mm Length: 1,500 mm Height: 1,200 mm
(Width: 1,580 mm, including stacker) (Height: 1,800 mm, including thread stand)
Temperature: 5°C to 35°C, Humidity: 35 to 85% (no condensation)
Model name
Application
APW-895
Max: 3,000 rpm
Lockstitch : 2.0 to 3.4mm (standard :2.5mm)
Condensation/Back tuck stitch selectable
Parallel duble welt, parallel single welt
Each with flap or without flap
8, 10, 12, 14, 16, 18 and 20mm
(Optional : 22, 24, 26, 28, 30 and 32mm)
Spun thread #60 (Recommended)
Vertical-axis 1.7-fold capacity hook
Slide thread tak-up lever
33.3mm
Driver by stepping motor
By a micro-computer
1. JUKI Grease A. 2. JUKI Grease B
Standard : 0.5MPa
40dm
3
/min(ANR)
238.5kg
Single phase/3-phase 200 V, 220 V, 230 V, 240 V (option 380 V)
Power voltage fluctuation Rated voltage ±10% or less
– 1 –
Application
APW-895
99 (1 to 99)
20 (1 to 20)
20 (1 to 20)
50/60 Hz
200VA
Advertisement
Table of Contents
