Table of Contents
Advertisement
Adjustment Procedures
Suction unit and related sections (setup)
1. Fasten the suction base mounting plate B
by means of the setscrews
frame.
2. Put the vacuum unit
fasten it with the setscrews
3. Fasten the hose mounting plates
by means of the setscrews
4. Pinch the hose by means of the hose holders
the main body frame with the setscrews
5. Enter the hose in the cable clamps
hose mounting plates
using the setscrews
to the main body frame
(8 pcs.) on the right and left of the
on the suction base mounting plate B
(8 pcs.).
(2 pcs.) to the main body frame
(4 pcs.).
(4 pcs.).
(2 pcs.) and fasten it to the
(2 pcs.), mounted in the step 3. above,
(2 pcs.).
Results of Improper Adjustment
and
(2 pcs.) and fix it to
– 66 –
Advertisement
Table of Contents
