Table of Contents
Advertisement
A
B
C
D
(11) I11 needle entry position check
Press the needle entry position check button
of the check program menu screen and display the
needle entry position check screen.
With the B button, output check is finished and the
E
swing clamp position is moved.
With the C button, folding plate operation setup is
carried out.
With the D button, flap holding operation setup is
carried out.
With the E button, a menu is recovered.
Similarly as for the welt type setup screen, the large
presser advances when the pedal is trodden on in
this screen and ordinary set operation becomes
possible. At that time, however, the binder does not
rise and lower.
The large presser retreats when you perform the
starting operation that is preset by pedal operation
setup.
Use it for the confirmation of a clearance between
the needle and the garment body clamp or folding
plate.
– 131 –
A
Advertisement
Table of Contents
