JUKI APW-895 Engineer's Manual page 190

Error code Pict
E491
E492
E493
E494
E495
E496
E497
E498
E499
E702
Corner knife length is too short.
When knife cannot be entered since the interval of corner knife is
short.
L size length is too short.
When sewing cannot be performed since the inputted L size
length is too short
L size length is too long.
When sewing cannot be performed since the inputted L size
length is too long.
Center knife length error
When center knife length is smaller than knife size of 6.7mm
Length at sewing start/sewing end over
When sewing length is shorter than the total of length os each
condensation (back tuck) at sewing start and sewing end
Condensation at sewing end length over
When condensation pitch X number of stitches exceeds 15.0mm
Back tuck at sewing end length over
When back tuck pitch X number of stitches exceeds 7.5mm
7.5
mm
Condensation at sewing start length over
When condensation pitch X number of stitches exceeds 15.0mm
Back tuck at sewing start length over
7.5
mm
When back tuck pitch X number of stitch exceeds 7.5mm
CPU runaway detection
When program abnormally has occurred in CPU
Description of error
– 185 –
How to recover
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Turn OFF the
power