Table of Contents
Advertisement
SPECIFICATIONS
1
No.
1
Model name
2
Stitch choice
3
Sewing speed
4
Needle gauge
5
Overedge width
Knife width
6
Thread sliding segment
7
Stitch length
8
Differential feed
9
Needle bar stroke
10 Presser foot height
11 Presser foot height by the knee lifting lever 6.0 mm
12 Presser foot height by the micro lifter (*1)
Feed dog height
13
14 Needle system (Japan)
Needle system (Overseas)
15 Number of needles
16 Number of threads to be used
17 Needle threader
18 Looper threader
Air pump
19
20 Power switch
21 Light
22 Motor
23 Foot control
24 Driving system
25 Machine size
26 Machine weight
* 1: Only for MO-2500 types
Items
2-Needle, 2/3/4-Thread Overlock Sewing Machine (with
differential feed adjusting)
2 needles, 4 thread overlock
2 needles, 3 thread overlock
1 needle, 3 thread overlock
1 needle, 2 thread overlock
Up to 1,500 sti/min
Rating 1,350±150 sti/min
Overlocking: 2.2 mm
2 needles, 4 thread: 4.5 to 7.0 mm
1 needle, 3 thread (right hand needle): 2.5 to 5.0 mm
1 needle, 3 thread (left hand needle): 4.5 to 7.0 mm
Roll hemming: 2.0 mm
2.5 to 5.0 mm
The thread sliding segment is in synchronism with the lower
knife at its standard position.
The amount of travel of the thread sliding segment must be
finely adjustable with the overedge width adjustment knob.
1.0 to 4.0 mm (Standard 2.5 mm)
1：0.7 to 2
29.4 mm
5.8 mm to 6.0 mm
2.5 mm
1.3 mm (This side end of the sub feed dog P = 2.5 mm;
differential feed ratio: 1:1)
ORGAN needle HA×11SP # 11 (Standard) to # 14
SCHMETZ (130/705H 15X1H) # 80
Max. 2
Max. 4
Operated by the manual lever
Automatic threading by the air pump
Piston pump driven by the motor
Motor: DC 12V
Rocker switch
LED 5V x 2
100V : 100 to 120W
110/120V : 100 to 120W
220 to 240V : 100 to 130W
No-heat method (semi-conductor control type)
Timing belt drive
350 mm (W) × 310 mm (D) × 340 mm (H)
10 kg
1
–
–
Description
Advertisement
Table of Contents
