Table of Contents
Advertisement
Adjustment Procedures
3. Installation of the suction motor
(1) Fix the suction motor
means of the setscrews
(Refer to the illustration for the setscrew
4. Installation of the suction pipe
(1) Install the suction pipe
of the hose bands
(2) The suction pipe
on the blower joint
5. Suction pipe fixing
(1) Pinch the suction pipe
means of the setscrew
6. Suction wiring
(1) Fix the switch wiring
as illustrated.
to the suction unit mounting plate
(6 positions).
on the blower joint
.
is connected to the filter box
B section by means of the hose bands
with the cable clip bands
.
by means of cable clips
by
position.)
A section by means
. Install this pipe
.
and fix it by
and the setscrews
– 80 –
Results of Improper Adjustment
Advertisement
Table of Contents
