Table of Contents
Advertisement
Adjustment Procedures
9. Divide the piping from the one-touch joint (PJ308040002)
two piping systems: one goes to the cylinder B system
other goes to the cylinder A system
Connect the tube
10. Remove the 7th plug cap from the left end of the manifold, mount the
solenoid valve
, and connect the cable
11. Secure the shim guide (40034442)
specific type)
with the 8 screws (SS5090210SP)
Adjustment of interlining clamp parallelism
1. If the parallelism between the interlining clamp
is not established, loosen the screw
2. If the parallelism between the interlining clamp
of the table is not established, loosen the screw
parallelism.
.
of the one-touch joint
to the sewing table (shim-
and adjust the parallelism.
into
and the
to the union
.
.
.
and clamp foot
and the top surface
and adjust the
– 64 –
Results of Improper Adjustment
Advertisement
Table of Contents
