Table of Contents
Advertisement
A
B
C
(3) IO3 flap sensor adjusting mode
Press the flap sensor adjusting button
the check program menu screen and display the flap
sensor adjusting screen.
(Caution) First of all, adjustment of the origin is
needed for the marking light.
1) When the flap sensor adjusting screen is opened,
D
the marking light moves to the flap sensor adjusting
position. Adjust the flap sensor spot so that it
coincides with the marking light radiating position.
2) Select the right and left sensors with B when fine
adjustments are needed for the flap sensor position.
Move the marking light with C and adjust the flap
sensor spot so that it coincides with the marking light
radiating position. Adjust the flap sensor spot so that
it coincides with the marking light radiating position.
3) Finish adjustments with D and recover the check
program menu screen.
– 119 –
A of
Advertisement
Table of Contents
