Table of Contents
Advertisement
Adjustment Procedures
1. Installation of the clamp bar stacker
(1) Let the stacker base
and the washers
(2) Determine the fixing size so that the end face of frame's vertical strut
and that of the stacker base
illustrated.
2. Stacker support plate and stacker positioning bolt positions
(1) Temporarily fasten the stacker positioning bolt
.
(2) Temporarily fasten the stacker support plate
and the washers
3. Stacker unit assembly
(1) Insert the stacker unit
.
fit the frame
and fix it with the setscrews
(in 3 positions).
are separated by 30.5mm, as
(in 4 positions).
in the mounting hole A of the stacker base
Results of Improper Adjustment
with the frame nut
with the setscrews
– 82 –
Advertisement
Table of Contents
