JUKI APW-895 Engineer's Manual page 185

Error code Pict
E028
E029
E030
E031
E050
E052
A201
A202
A203
E220
Description of error
Write error
Data write from server cannot be performed.
Lid media slot is open.
Needle bar upper position failure
Needle bar is out of needle up position.
Air presser drop
Air presser is low.
Stop switch
When stop switch is pressed.
Thread breakage detection error
When thread breakage is detected.
Needle replacing time warning
When number of stitches of operation is reached to number of
stitches of needle replacement that is set from the panel.
Cleaning time warning
When operation time of the sewing machine is reached to the
cleaning time that is set from the panel.
Oil replacement time warning
When operation time of the sewing machine is reached to the oil
replacement time that is set from the panel.
Grease-up warning
When the number of stitches has reached 40 million.
– 180 –
How to recover
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Turn the hand
pulley to bring
the needle bar
to its specified
position.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.