Table of Contents
Advertisement
No.
Stacker timer 3
Motion time of material sweeping bar is set.
* It is possible to set only when
Stacker timer 4
Time to advance timing to release the sewing product by lifting clamp foot is
set.
When clamping a short sewing product, the amount to drop by tare is
adjusted.
* It is possible to set only when
Sewing speed under the high-speed mode
Number of revolutions of lockstitch section is set.
* It is possible to set only when
set to memory switch
Sewing speed under the low-speed mode
Number of revolutions of condensation and back tuck sewing sections is set.
* It is limited by
* It is possible to set only when
set to memory switch.
Soft start, 1st stitch
Number of revolutions of first stitch at sewing start is limited.
Soft start, second stitch
Number of revolutions of second stitch at sewing start is limited.
Soft start, third stitch
Number of revolutions of third stitch at sewing start is limited.
Return speed of clamp foot
Return speed of clamp foot i set.
......... Item that is not displayed due to other setting start.
Item
clamp bar stacker option is used.
clamp bar stacker option is used.
sewing speed setting selection is
sewing speed under the high-speed mode.
sewing speed setting selection is
– 100 –
Setting range
/
Initial value
Edit unit
0.00 to 9.99
0.70 sec.
/
0.01 sec.
0.00 to 9.99
0.00 sec.
/
0.01 sec.
1000 to 3000
2500rpm
/
100rpm
1000 to 2500
1500rpm
/
100rpm
500 to 2500
500rpm
/
100rpm
500 to 2500
700rpm
/
100rpm
500 to 2500
1000rpm
/
100rpm
3 to 7
7
/
1
Advertisement
Table of Contents
