Adjustment Procedures
9. Auxiliary table and cushion assembly and position adjustments
(1) If the frame
interferes with the right and left ends of the material
wipe-out bar
, attach an accessory cushion
interference.
10. Clamp bar cord fixing
(1) Use the cable clip bands
air pipes are not pinched when the stacker as a whole is swiveled.
11. Overall stacker position check
(1) Confirm that no interference is present at each part and Section A
when the stacker is actuated or the stacker unit is swiveled.
to the section of
for fixing so that the stacker cords and
– 88 –
Results of Improper Adjustment