JUKI APW-895 Engineer's Manual page 67

Adjustment Procedures
1. Secure the shim bracket (40028198)
with the 2 screws (SL6051692TN)
2. Secure the cylinder (PA1500505A0)
cylinder bracket (40034466)
bag clamp cylinder rod (40034467)
Mount the speed controller (PC010507000)
3. Secure the pocket bag clamp guide plate (40034469)
with the 4 screws
Press the pocket bag clamp cylinder bushing (40034468)
pocket bag clamp guide plate
4. Secure the cylinder
5. Secure the cylinder (PA160152900)
bracket (40034471)
Secure the cylinder cover
Mount the speed controller
6. Secure the cylinder
7. Secure the interlining clamp
8. Lock the pocket bag clamp
with the 2 screws
pocket bag clamp
to the shim base (40026610)
.
to the pocket bag clamp
with a screw and tighten the pocket
onto the cylinder shaft.
(SL6051692TN) .
.
to the frame with the 2 screws
to the interlining clamp cylinder
with the screw and nut
to the cylinder
on the cylinder
to the suction base
to the cylinder
at 108 mm distance from the table
and position the push rod
.
on the cylinder .
to the frame
into the
.
.
with the 2 screws .
.
with the 2 screws .
with the screw .
at the center of the
108mm
– 62 –
Results of Improper Adjustment