Table of Contents
Advertisement
Adjustment Procedures
1. Installation of suction motor unit
(1) Install the blower joint
(2) Install the suction motor
by means of the setscrews
. (4 positions)
2. Installation of the suction switch
(1) Fix the power switch
the setscrew
.
Switch wiring
(1) Provide wiring inside the power switch
in the illustration.
Installation of the switch on the suction motor
(1) Install the suction switch set
by means of the setscrew
on the suction motor
on the suction motor mounting plate
, washers
, cushions
to the switch mounting plate
according to the instructions
on the suction motor mounting plate
.
Results of Improper Adjustment
.
, and rubber
by means of
– 78 –
Advertisement
Table of Contents
