Table of Contents
Advertisement
3. Replacement of FLT board
If this board is out of order, possible errors will occur in the AC input power supply.
In another case, both the SDC board and the MAIN board can be defective at the same time.
Note that there are two types of boards according to the power specifications.
40000046 : Single-phase 200V FLT board asm.
40000056 : Single-phase 100V/3-phase 200V FLT board asm.
C10
C9
– 141 –
(Caution)
The setup procedures shall
conform to the input source
voltage specifications for 100V/
2 0 0 V s o u r c e c h a n g e o v e r
terminals.
Advertisement
Table of Contents
