Table of Contents
Advertisement
No.
Condensation/back tuck detailed setting
Detailed setting "Perform/Not perform" of pitch of condensation/back
tack section is selected.
Flap stopper position
In case of flap sewing start irradiation position of marking light
(distance from needle) is set
* Setting is only the irradiation position of marking light. Actual sewing
position is the flap end position detected by the flap sensor.
Number of stitches of grease-up
Number of stitches of sewing machine motion after replenishing grease is
indicated.
* When pressing CLEAR button, number, of stitches is cleared to "0".
Be sure to clear after replenishing grease.
Language selection
Language to be indicated in panel is selected.
Item
Perform
English
Japanese
Not perform
English
Chinese
– 102 –
Setting range
/
Initial value
Edit unit
- - -
80.0 to 280.0
80.0mm
/
0.1mm
- - -
- - -
- - -
No selection
Advertisement
Table of Contents
