JUKI APW-895 Engineer's Manual page 189

Error code Pict
E401
E402
E403
E404
E435
– – –
E484
E485
E486
E489
E490
Description of error
Copy disapproved
When trying to perform overwriting copy on the pattern No. which
has been already registered
Erasing disapproved
When trying to delete the pattern used in the cycle sewing
New creation disapproved
When the registered pattern is selected to the new creation
pattern No.
Data of designated No. does not exist.
When data of designated No. Does not exist in medai or server
Out of input range error
When numeral that is set with ten-key exceeds the setting range
Zipper attaching data cannot be sewn.
Data other than zipper attaching data cannot be sewn.
Flap sewing data can not be sewn.
Combination data other than right/left flap sewing is set at
the time of flap priority setting of alternate sewing mode.
It is not possible to feed pup to corner knife position.
When flap is put on this side in case of the ling type
– 184 –
How to recover
Possible to
recover with
CANCEL button.
Possible to
recover with
CANCEL button.
Possible to
recover with
CANCEL button.
Possible to
recover with
CANCEL button.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.