Table of Contents
Advertisement
4. Replacement of PMDC board (for roller stacker)
If this board is out of order, roller stacker revolutions will become abnormal or there will be lack of torque.
Make all settings again because all the dip switches are set at OFF if the replacing board is a newly purchased
item.
Dip switch setting should conform to (3) Dip switches, 4) Dip switches of the PMDC board.
Make the resetting of the dip switches.
SW1-1 only is set at OFF and SW1-2 to 4 are at ON.
– 142 –
Advertisement
Table of Contents
