Storing A Telephone Number - Ricoh FAX2900L Operator's Manual

ready programmed as the sub-
address key. Then enter the
subaddress.
To enter a subaddress, you
must use a Dial Option Key. On
how to program a Dial Option
Key using Function 31, seeP.30
"Storing, Editing & Erasing Quick
Dial Numbers (Function 31)".
You can also store a subaddress
in a User Function key (F1 or F2)
and recall it later. For how to
program the User Function
Keys, see P.108 "User Function
Keys (Function 36)".
Type 2 users can also use the
{Subaddress} key to input a sub-
address.
Reference
On how to dial, P.17 "Memory
Transmission
Transmission".
E
Press the {Yes} key.
TRANSMIT DIAL/START
DIAL NEXT NUMBER
F
Either:
• Dial more numbers: go to step
D.
• Start the transmission: press
the {Start} key.
Note
If the other party has not had a
G4 Terminal ID programmed,
you will see "=" on the screen
during transmission, instead of
their ID.
And Immediate

Storing a Telephone Number

The following example shows how to
store a Quick Dial if the ISDN Inter-
face has been installed. The differenc-
es between this procedure and the
procedure for the base machine (P.30
"Storing & Editing Fax Numbers (Func-
tions 31 & 32)") are as follows:
• You have to select G3 or G4 before
you input a Quick Dial or Speed
Dial.
• You may have to input a subad-
dress for a G4 number if the desti-
nation has one.
A
Press the {Function} {3} {1} and
{Yes} keys.
ak
PRINT/LISTh/SEARCHi
B
Press the Quick Dial Key that you
wish to program.
Example: {01} {Yes}.
a01
kkkkkkkk<G3>kkkkkkkk
C
Change the line type (G3/G4) to
the correct setting by pressing the
G4 key on the operation panel.
D
Enter the telephone number at the
operation panel's ten key pad.
a01
7005551234kkkkkkkkkk
Note
G3 numbers – If your machine is
behind a PBX, include the PBX
access code and a pause before
the number. For an internation-
Operation
QUICK/hi
QUICK/hi
9
KPAD/N
183