Troubleshooting; Call Progress Signals (Cps) - Ricoh FAX2900L Operator's Manual

ISDN

Troubleshooting

Call Progress Signals (CPS)

Sometimes, a Call Progress Signal and an error message will appear on the dis-
play panel. Possible messages are as follows.
DIALING
REMOTE TERMINAL BUSY
WRONG NUMBER
LINE NOT AVAILABLE
FAX NUMBER CHANGED
REMOTE FAX REJECTED
UNABLE TO CONNECT
NO RESPONSE
NETWORK BUSY
CLASS INCOMPATIBLE
CHECK INTERFACE
9
To remove the message from the display, make sure that the Communicating in-
dicator is not lit, then press the {Stop} key.
188
The machine is dialing; do not press the
{Stop} key.
Try again later.
Check the number, and check that G3 or
G4 was correctly selected.
Then redial.
Try again later.
Find out the new fax number.
Contact the user at the other end.
Try again.
Try again.
Try again later.
The other terminal's signaling mode is not
compatible with yours, and the message
cannot be sent.
Check that the ISDN line cord is connect-
ed properly. Then try again.