Babt Notice - Ricoh FAX2900L Operator's Manual

Hide thumbs Also See for FAX2900L:
Table of Contents

Advertisement

BABT Notice

NOTICE TO USERS (Great Britain)
This model is designed and approved
for connection to the following cir-
cuits.
• British Telecom Public Switched
Telephone Network
• Hull Public Switched Telephone
Network
• PABX Extensions
• Mercury Communications Limited
Public Switched Telephone Net-
work
CONNECTION TO THE PSTN OR A
PABX EXTENSION
If there is a line or jack socket al-
ready installed you may connect
this model using the line lead sup-
plied. If you require a socket to be
fitted, complete the attached form
and send it to your local telephone
manager's office.
IMPORTANT NOTICE
A
The connection to the BT net-
work must be unplugged before
the earth is disconnected.
B
The connection to the BT net-
work must not be hard wired.
C
Please ensure that connection to
the mains supply(240VAC), is
correctly made and that the
power is switched on before
use.
D
The apparatus is suitable for di-
rect connection to exclusive
lines of Public Switched Tele-
phone Network, and for con-
13. BABT Notice
nection to compatible PABXs
(consult your authorised dealer
for the list of compatible PABXs
and for installation thereon), or
via an RBS. The definition of an
RBS (Relevant Branch System)
for PSTN lines, is given in
BS6789 section 6.1, clause 2.4.
E
When idle, this model allows
normal use of an associated
main telephone, which must be
plugged into the BS6312 com-
patible connector, provided for
telephone line connection. Only
one such connection may be
made.
F
The apparatus must be connect-
ed to PSTN lines which use loop
disconnect or DTMF signalling.
G
The machine is not suitable as
an extension to a payphone, for
use on shared service lines, or
on 1 - 1 carrier systems.
H
The Terminal operates in mode
1 (autodialling).
I
The user is advised to check all
numbers stored in the register
before making a call.
J
The approval of this terminal
for connection to the British Tel-
ecom public switched telephone
network is INVALIDATED if
the apparatus is subject to any
modification in any material
way not authorised by BABT or
it is used with, or connected to:
a) Internal software that has not
been
formally
BABT.
accepted
by
221

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Fax2900li

Table of Contents