Switching The Command Information Line On/Off - Ricoh FAX2900L Operator's Manual

Switching the Command
Information Line On/Off
This is similar to the TTI On/Off
switching option for Group 3 Trans-
mission (see P.26 "Sending Your Iden-
tification at the Top of Your Message
(TTI)").
The Command Information Line con-
sists of the Receiver and Transmitter
Terminal IDs, the Date and Time, and
the Page Number. Normally, this line
is printed at the top of each of the pag-
es you transmit when they are re-
ceived at the other end. The top of the
image will be overprinted if there is
no margin at the top of the transmit-
ted page.
In some cases, you may wish the oth-
er party to receive an unmarked copy
of your original. In this case, you can
switch the Command Information
Line off.
To switch this feature on or off, adjust
bit 5 of switch 2 with the User Param-
eters:
• Bit 5= 0: Off
• Bit 5= 1: On
(See P.162 "User Parameters".)
Note
If you switch the Command Infor-
mation Line off, make sure that La-
bel Insertion is also off if you want
the image received at the other end
to be unmarked.
Operation
9
187