Ricoh FAX2900L Operator's Manual page 178

-List of all relevant user parameters
Many bit settings have no effect and are not listed. (Never change these). The set-
tings made at the factory are underlined.
SW Digits & Definition
00 0: Default setting for Stamp
1,2 and 3
4, 5: Default resolution when you send a
message
RESOLUTION
HALFTONE
6: Default setting for transmission.
TRANSMISSION
01 7: If you change any of resolution, transmis-
sion mode setting before making a trans-
mission , then
0: The setting(s) will not return to the home
position after the transmission.
1: The setting(s) will return to the home po-
sition after the transmission.
User Parameters
Settings
0: Off
1: On
Do not change these set-
tings
Bit: 4, 5
0, 0: STANDARD
1, 0: DETAIL
1, 0:FINE
HALFTONE
0: Memory
1: immediate
0: Off
1: On
8
163