Editing The Rti/Csi For The Special Terminals - Ricoh FAX2900L Operator's Manual

Other Features
G
Press the {Yes} key.
SET # OF COPIES Y/hi
ON
H
Select whether you set this RTI/
CSI as the special terminal for
Multi copy using V or W. (if yes:
ON, if no: OFF)
SET # OF COPIES Y/hi
iON
I
Press the {Yes} key.
SET MEM. LOCK
5
ON
iOFF
J
Select whether you set this RTI/
CSI as the special terminal for
specified Memory Lock using V
or W. (if yes: ON, if no: OFF)
SET MEM. LOCK
iON
K
Press the {Yes} key.
SET CASSE SLCT
ON
iOFF
L
Select whether you set this RTI/
CSI as the special terminal for
specified Cassette Selection using
V or W. (if yes: ON, if no: OFF)
SET CASSE SLCT
iON
M
Press the {Yes} key.
RTI/CSI
kkkkkkkkkkkkkkkkkkkk
82
iOFF
OFF
Y/hi
Y/hi
OFF
Y/hi
Y/hi
OFF
ABC
hi
N
Either:
To program another special
terminal
A Go to step C.
To finish
A The {Function} key.
-Hints for programming the
special senders
You must specify the sender's identi-
fication code (see P.207 "Initial Set-
tings & Adjustments") which could be
a little different from their phone
number.
To get the other party's identification,
call and ask for their CSI or RTI code.
Explain that you need the number
programmed into their fax machine
for identification purposes. Or, at-
tempt a communication with their fax
machine and print out a Journal re-
port (function 41, see P.93 "Journal
(Function 41)"). Read the identifica-
tion under the RTI or CSI heading of
the report.
Editing the RTI/CSI for the
Special Terminals
A
Press the {Function} {6} then enter
the access code {2} {2} {2} {2}.
Then press {8} {1} and the {Yes}
key.
SETTING?
PRINT LISTh/SEARCHi
Y/hi