Immediate Transmission - Ricoh FAX2900L Operator's Manual

Faxing
After a Parallel Memory Transmis-
sion fails, a communication result re-
port or a communication failure
report is printed.
Important
The file is erased if any of the fol-
lowing happen during transmis-
sion:
• The Stop key is pressed.
• There is not enough memory
available.
• A document becomes jammed.
4
Limitation
If the amount of available memory
is less than 50 %, you cannot use
Parallel Memory Transmission.
Note
Normal
still takes place when using the fol-
lowing:
• Send Later
• Specify Multiple Destinations
• Transfer Request
• Transmission Deadline
When using Parallel Memory
Transmission, page numbers are
not printed at the other end. If you
want page numbers printed, use
Printing the Page Number of the
optional feature for transmission.
(See P.25 "Printing the Page Number
(Page Count)".)

Immediate Transmission

Immediate Transmission is conven-
ient when:
• You wish to send a message imme-
diately.
20
Memory Transmission
• You wish to quickly check whether
you have successful connected
with the other party's fax machine.
• Your machine's memory is getting
full.
The machine dials immediately after
you press the {Start} key (or at the
specified later time, if you used a
time-delay feature like Send Later).
The message is scanned and transmit-
ted page by page without being
stored in memory.
A
Make sure that the machine is in
standby mode.
The display should look like this:
READY 100% 10:00
SET DOC. OR DIAL NO.
Note
The memory indicator should
go out. If the memory indicator
is lit, press the {Memory} key.
B
Place the entire document face
down into the feeder.
TRANSMIT
DIAL FAX NUMBER
Note
No more than 30 pages.
You can dial before you set the
document. Place the document
after you dial the number and
go to step D.
C
Dial.
TRANSMIT
5551234
D
Press the {Start} key.
OPTIONi
Y/START