Ricoh FAX2900L Operator's Manual page 27

Machine Layout
ceived into memory. Blinks when con-
fidential reception file or memory lock
file is stored in the memory. (see P.139
"If an Indicator Lights up on the Opera-
tion Panel" ).
5.
{Resolution} key.
The resolution/Halftone is indicated
by these three indicators and can be
changed by the resolution/Halftone.
When the Indicator is not lit, Standard
is selected.
3
6.
Memory key/ indicator
When the Memory indicator is on,
then memory transmission is in effect,
if it is off, immediate transmission is in
effect. Switch between the two with
the {Memory} key.
7. {G4} Selector Key/Indicator
Press to select G4 mode. When this in-
dicator is not lit, G3 is mode. The dis-
play backlight enhances readability.
8.
Control panel Display
The Liquid Crystal Display guides
you through tasks and informs you of
the state of the machine. Messages ap-
pear here. The display consists of two
20-character lines.
9. {Speed Dial/Tel Directory} key
Press the {Speed Dial/Tel Directory} key
using Speed Dialor the Telephone Di-
rectory Feature.
10. {Pause/Al Redial} key
The {Pause/Al Redial} key inserts a
pause when you are dialing or storing
a fax number. Or, press the key to re-
dial the last number dialed. (The redi-
al feature doesn't work once you've
started dialing a new number.)
11.
Arrow keys
T {Yes} accept
U {No} reject/ {Help} (Type 1 only)
Print help list
12
W scroll left/ {Paper Size} The paper
size selection screen for each cassette
will appear.
V scroll right/ {Option} Press to access
the options.
12.
Manual Receive indicator.
Lights when the reception mode is
Telephone.
13.
{Clear Modes} / {Energy Saver} key
Clear Modes: Press to clear any select-
ed settings and return the condition it
was in just after being switched on.
Energy Saver: Hold a few seconds this
to start or end the energy saver mode.
14. {Copy} key
Press this to copy the document now
in the feeder.
15.
{Reception Mode} key
Press this to select the reception mode
(Tel or Fax).
16. {Function} key
Press the {Function} key and enter a
two digit code to access functions 11
to 55. (For functions 61 to 95, enter 6,
the access code on see P.161 "Access
Code for Functions 61 to 95" and the
function number.)
17.
{Stop} key
Press the {Stop} key to stop a trans-
mission or a document scanning, to
stop a reception or to stop a long copy
run. The machine will finish printing
out the sheet being printed and then
stop.
18. {Start} key
Press the {Start} key to start all tasks.
19.
Ten key pad
Use the ten key pad (sometimes called
the ten keys) to dial fax numbers, to
enter the numbers of copies, etc.
20. {On Hook Dial} key (Type 1 only)
Press the {On Hook Dial} key to dial a
phone call from the keypad without