Programming The G4 Subscriber 1; Programming The G4 Subscriber 2 - Ricoh FAX2900L Operator's Manual

Reference
"Initial Settings & Adjustments" ⇒
P.207.
Programming the G4
Subscriber 1
Program the Second
Number when you have two units
connected to the same line. Program
the number of the other as the Second
Subscriber Number. When a call
comes in, if the other unit is busy,
your machine will answer the call.
A
Press the {Function} {6} then enter
the access code {2} {2} {2} {2}.
Then press {6} {4} and the {Yes}
keys.
SET G4_SN1
B
Press {Yes} key.
G4_SN1
kkkkkkkkkkkkkkkkkkkk
C
Input your G4 subscriber number
1.
Example: 212–5556789
G4_SN1
212-5556789kkkkkkkkk
Note
You can enter up to 20 digits.
Insert a pause after the area
code.
D
Press the {Yes} and {Function}
keys.
Programming the G4
Subscriber 2
A
Subscriber
B
C
Y/NEXTi
D
KPAD
KPAD/Y/N
E
Setting up the Group 4 Interface
Press the {Function} {6} then enter
the access code {2} {2} {2} {2}.
Then press {6} {4} and the {Yes}
keys.
SET G4_SN1
Press V until the screen is as
shown.
SET G4_SN2
Press the {Yes} key.
G4_SN2
kkkkkkkkkkkkkkkkkkkk
Input your G4 subscriber 2
number.
Example: 212–5556789
G4_SN2
212-5556789kkkkkkkkk
Note
You can enter up to 20 digits.
Insert a pause after the area
code.
Press the {Yes} and {Function}
keys.
Y/NEXTi
Y/NEXTi
KPAD
KPAD/Y/N
9
179