Entering Energy Saving Mode; Exiting Energy Saving Mode; Selecting The Energy Saving Mode Type; Reception In Energy Saving Mode - Ricoh FAX2900L Operator's Manual

Other Features

Entering Energy Saving mode

The machine enters Energy Saving mode when:
• Nobody uses the machine for about 5 minutes (it automatically enters Energy
Saving mode).
• The user holds down the Energy Saver key for about 2 seconds.
Note
If you want to change the five minute period to one or three minutes, or if you
do not want your machine to enter the Energy Saving mode automatically,
please contact your service representative.
Energy Saving mode cannot be entered when a document is set.

Exiting Energy Saving mode

5 Your machine exits Energy Saving mode when a fax is received.
To exit Energy Saving mode manually:
• In Energy Saving Standby mode, press the Energy Saver key.
• In Fax Standby mode, press any key.
• Set a document.
• Pick up the optional handset or the external telephone handset.

Selecting the Energy Saving mode type

To select the Energy Saving mode type, adjust the bit switch below with the User
Parameters. (See P.162 "User Parameters".)
Switch 05 bit 6
• Energy Saving Standby: To let the heating roller cool to room temperature,
set bit 6 to 0.
• Fax Standby: To let the heating roller cool halfway set bit 6 to 1.
Note
When the machine is shipped, Energy Saving Standby is selected on by de-
fault.

Reception in Energy Saving mode

Once in Energy Saving mode, you can still receive messages. When a message is
received, the machine prints it and returns to Energy Saving mode.
96