Connecting The Machine - Ricoh FAX2900L Operator's Manual

Installation

Connecting the Machine

Before using the machine, connect the machine to the telephone line properly.
Then plug in the power cable and switch on.
Make sure the machine is properly connected to the telephone line and the pow-
er outlet, as shown following.
Do not switch on until everything is connected properly.
Program the Telephone Line Type setting (use Function 62; see P.211 "Setting the
Phone Line (Function 62)"). If your telephone normally sends out tones (touch
tone) when dialing, use the TT setting; if it normally sends out pulses (rotary di-
al), use the DP setting. Also, make sure that the switch on the handset is set up
correctly.
10
204