Fig. 146 Selection Of The Oversampling Variable With The Target Browser; Fig. 147 Appending The Variable "Aui_Samples" Below "Axis" Within The Scope Project Of The Solution Explorer - Beckhoff EL3632 Documentation

Fig. 146: Selection of the oversampling variable with the target browser
By addressing the corresponding system that represents the PLC containing the array variable ("Any PC
(CX2040)" in this case) navigation up to the variable "aUI_Samples" (C) have to be done.
Fig. 147: Appending the variable "aUI_Samples" below "axis" within the scope project of the solution explorer
Variable don't appears into the target browser
If „ROUTES" don't offer a possibility for selection of the provided variables, the corresponding port
should be declared for the target browser:
Using "Add symbol" displays the variable "aUI_Samples" below "axis" within the scope project of the solution
explorer directly.
EL3632 Version: 2.8
Commissioning
115