Beckhoff EL3632 Documentation page 133

Index 80n8 AI advanced settings (for n = 0: channel 1; n = 1: channel 2)
Index (hex) Name
80n8:0 AI Advanced Settings Maximum subindex
80n8:06 Input Amplifier
Index 80nF AI Vendor data (for n = 0: channel 1; n = 1: channel 2)
Index (hex) Name
80nF:0 AI vendor data
80nF:01 Calibration offset
(gain 1)
80nF:02 Calibration gain (gain
1)
80nF:03 Calibration offset
(gain 20)
80nF:04 Calibration gain (gain
20)
Command object
Index FB00 command
Index (hex) Name
FB00:0 DCM Command
FB00:01 Request
FB00:02 Status
FB00:03 Response
Input data
Index 60n0 Status (for n = 0: channel 1; n = 1: channel 2)
Index (hex) Name
60n0:0 SAI Inputs
60n0:01 Underrange
60n0:02 Overrange
60n0:03 Limit 1
60n0:07 Error
60n0:0E Sync error
60n0:0F TxPDO State
60n0:10 TxPDO Toggle
EL3632
Meaning
permitted values:
0: Preset (setting via object 0x80n0:15 [} 132])
1: ON (switch-on of the analog amplifier x20 irrespective
of filter settings; gain factor of 20 is not changeable)
2: OFF (switch-off of the analog amplifier irrespective of
the filter settings)
Meaning
Maximum subindex
Offset (vendor calibration), gain 1
Gain (vendor calibration), gain 1
Offset (vendor calibration), gain 20
Gain (vendor calibration), gain 20
Meaning
Command interface
0x8000: Software reset, hardware is re-initialized with the
current CoE configuration (this otherwise happens only
during the transition to INIT)
0x8000: 0x01 if a reset has taken place
0x8000: not used
Meaning
Maximum subindex
Indicates that the electrical measuring range is undershot BOOLEAN
Indicates that the electrical measuring range is exceeded BOOLEAN
1: one or more values smaller than or equal to Limit 2
2: one or more values greater than or equal to Limit 1
3: 1 and 2 both true
Measuring error
Synchronization error
Validity of the data of the associated TxPDO (0 = valid, 1
= invalid).
A new measured value is available (if the toggle bit was
changed).
Status bits may be changed independent from the toggle
bit.
Version: 2.8
Commissioning
Data type Flags Default
UINT8 RO 0x06 (6
BIT2 RW 0x00 (0
Data type Flags Default
UINT8 RO 0x04 (4
INT16 RW 0x0000 (0
INT16 RW 0x0000 (0
INT16 RW 0x0000 (0
INT16 RW 0x0000 (0
Data type Flags Default
UINT8 RO 0x03 (3
OCTET- RW {0}
STRING[2]
UINT8 RO 0x00 (0
OCTET- RO {0}
STRING[4]
Data type Flags Default
UINT8 RO 0x10 (16
RO 0x00 (0
RO 0x00 (0
BIT2 RO 0x00 (0
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
133