30 •
750-562 [2 AO 0/+-10V DC 16 Bit]
Parameter Setting
The display field offers the following diagnostic possibilities:
Name
Common
Collective Fault
Output Error
Overload
Excess Temperature
Common
Power Supply
K-Bus Load Error
K-Bus Voltage Too Low
Overstepping Limit Values
Upper Limit
Lower Limit
Input/
Description
Selection
No group error.
Group error present.
No output driver error (LAST).
Output driver error (LAST) present.
No output driver error (TEMP).
Output driver error (TEMP) present.
No output driver error (COM).
Output driver error (COM) present.
Load on 5 V system voltage OK.
Load on 5 V system voltage too great.
5 V system voltage OK.
5 V system voltage smaller 4.65 V.
Underrange limit value is not undershot.
Underrange limit value is undershot.
Overrange limit value is not exceeded.
Overrange limit value is exceeded.
WAGO-I/O-SYSTEM 750
I/O Modules