WAGO I/O-SYSTEM 750 Manual page 25

2.1.1.9.3.1.4 Input and Selection Fields
This area of the 2-channel output module consists of 3 pages.
On the Settings and Offset/Gain pages, you can change and set the
parameters.
The Process data page displays information about the process value of the
module and displays the status messages.
Changing and saving data
Changed settings are marked with a change symbol
the values displayed now no longer match the values originally queried from
the module. In order to transmit the new values to the module, click the
[Write] button. The change symbols disappear.
2.1.1.9.3.1.4.1
The Settings page enables the setting of the general module parameters.
Fig. 2.1.1-10: Settings
WAGO-I/O-SYSTEM 750
I/O Modules
Settings
750-562 [2 AO 0/+-10V DC 16 Bit]
Parameter Setting
in order to indicate that
• 25