WAGO I/O-SYSTEM 750 Manual page 23

2.1.1.9.3.1.1 Title Bar
The position of the module within the mode as well as its name, item, and
version number are displayed on the title bar of the parameterizing dialog.
2.1.1.9.3.1.2 Toolbar
The toolbar on the 2-channel output module parameterization dialog contains
the following buttons:
Fig. 2.1.1-8: Buttons on the parameterization dialog
Button
WAGO-I/O-SYSTEM 750
I/O Modules
Description
[Exit]
closes the active window.
If you have changed settings, you are requested for the final assumption of the
values into the device.
[Open]
displays the Open File window to select a parameter file.
Remark:
The I-parameters will be read only from this file to display them into the first
column of the table.
They will not be transferred to the I/O module.
[Save]
displays the Save File window to select a parameter file.
Remark:
The actual I-parameters will be saved to this file.
[Read]
read out the current settings from the attached device.
[Write]
transfers the indicated settings into the attached device.
[Help]
shows the help for this window.
750-562 [2 AO 0/+-10V DC 16 Bit]
Parameter Setting
• 23