WAGO I/O-SYSTEM 750 Manual page 27

Description
User Power-On Value
WAGO Power-On
Value
* Factory setting
Note
The values for the lower and upper limit value must be entered in raw data
format, that is, if a user scaling is set, it must be taken into account for the
entry of the limit values.
If in addition a numeric display in the (+/-) range is selected, the limit values
must be converted into equivalent values for a positive numeric range.
2.1.1.9.3.1.4.2
The Offset/Gain page enables the setting of the offset and amplification
values of the user and manufacturer scalings.
Fig. 2.1.1-11: Offset/Gain
WAGO-I/O-SYSTEM 750
I/O Modules
Input/Selection
0* ... +65535
0* ... +65535
Offset/Gain
750-562 [2 AO 0/+-10V DC 16 Bit]
Parameter Setting
Description
Setting of the user substitute value
Setting of the manufacturer
substitute value
• 27