Regular Maintenance Work - Advantech Dlog DLT-V72 Series Startup Manual

9

REGULAR MAINTENANCE WORK

General
To avoid damage to the DLT-V72 and to ensure safe functioning:
− Depending on the load and environmental conditions, check at least once per month, and
more often if necessary, that all connected cables are secured and that the cable cover is
tightly sealed (important for IP protection against dust, etc.).
Cleaning the device
There is a danger of electric shock if live parts of the DLT-V72 are touched during cleaning.
− Switch off the DLT-V72 before cleaning.
− Disconnect from the power supply.
− Disconnect connected accessories.
− Clean the touchscreen and housing with a damp cloth and a neutral glass cleaning agent.
− Do not use any chemicals such as benzene, thinner or acidic/alkaline solutions for cleaning.
− Do not use any compressed air or high-pressure cleaning equipment.
Devices used in vehicles
DLT-V72 devices used in vehicles are subject to high loads due to vibration and shocks.
To ensure the secure fastening of the device to the vehicle, the following points must be checked
at least once a month, and where necessary more often, depending on the load and
environmental conditions:
− Check that the DLT-V72 is securely positioned in the corresponding mount (e.g. in the RAM
mount or in the mounting bracket).
− Check that all fastening elements are correctly secured (e.g. screws, etc.).
− Check that the mounting with the DLT-V72 is securely fastened to the vehicle.
11