Servicing
Optional DMC Ozonator
Replacement
7-46
49iQ Instruction Manual
Ozonator
Use the following to replace the ozonator.
Equipment required:
Phillips drive, #2
1. Remove the ozonator DMC from the instrument. Refer to
Ozonator
2. Unplug heater and lamp cable.
Figure 7–53. Ozonator replace pt 1
3. Using a #2 Phillips drive, unfasten three #6-32 flat head screws.
4. Pull out ozonator
Removal" on page 7-41.
"DMC
Thermo Scientific