Measurement Side Removal And Replacing; Figure 7-9. Unplugging The Fan Cable - Thermo Scientific 49iQ Instruction Manual

Measurement
Side Removal
and Replacing
Thermo Scientific
Use the following procedure to remove and replace the measurement side if
necessary.
Equipment required:
Phillips drive, #2
1. Turn instrument OFF, unplug power cord, and remove the cover
(Figure 2–1).
2. Unplug the fan cable J18
Figure 7–9. Unplugging the Fan Cable
3. Unplug DMC cable

Measurement Side Removal and Replacing

(Figure 7–9).
(Figure 7–10).
Servicing
49iQ Instruction Manual 7-9