Ozonator Dmc Board Replacement; Figure 7-52. Replacing The Ozonator Dmc Board - Thermo Scientific 49iQ Instruction Manual

Ozonator DMC
Board Replacement
Thermo Scientific
Use the following procedure to replace the ozonator DMC board.
Equipment required:
Phillips drive, #2
1. Remove the ozonator DMC from the instrument. Refer to
Ozonator Removal" on page 7-41.
2. Unplug heater and lamp cable.
3. Using a #2 Phillips drive, unfasten five #6-32 pan head screws.
Figure 7–52. Replacing the Ozonator DMC Board
4. Replace ozonator DMC board and reassemble in reverse order.
Servicing
Optional DMC Ozonator
"DMC
49iQ Instruction Manual 7-45