Thermo Scientific 49iQ Instruction Manual page 107

Thermo Scientific
Down:
●
Detector 1 Manual Entry: Shows current values for detector 1. If
●
detector cal cell is pressed, user can manually set the detector 1 cal
value.
Detector 2 Manual Entry: Shows current values for detector 2. If
●
detector cal cell is pressed, user can manually set the detector 2 cal
value.
Auto Cal: When Start is pressed, the auto-calibration process is
●
initiated. Please allow up to 5 minutes for calibration to complete.
User can stop calibration by pressing the Stop button.
End Cal: When Stop is pressed, the auto calibration is interrupted
●
and the value does not change.
Default Values: When pressed, the default values are saved.
●
Operation
Settings
49iQ Instruction Manual 3-79