Beckhoff EL6731 Documentation page 73

Scan over existing Configuration
Change of the configuration after comparison
With this scan (TwinCAT 2.11 or 3.1) only the device properties vendor (manufacturer), device name and
revision are compared at present! A 'ChangeTo' or 'Copy' should only be carried out with care, taking into
consideration the Beckhoff IO compatibility rule (see above). The device configuration is then replaced by
the revision found; this can affect the supported process data and functions.
If a scan is initiated for an existing configuration, the actual I/O environment may match the configuration
exactly or it may differ. This enables the configuration to be compared.
Fig. 71: Identical configuration (left: TwinCAT 2; right: TwinCAT 3)
If differences are detected, they are shown in the correction dialog, so that the user can modify the
configuration as required.
Fig. 72: Correction dialog
It is advisable to tick the "Extended Information" check box to reveal differences in the revision.
EL6731
Parameterization and commissioning
NOTE
Version: 2.8 73